SR Francis flame and water drop logo S R Francis PLUMBING & HEATING maintaining the flow of H₂O
SR Francis Gas Safe Registered credentials
Which? Trusted TraderTrustATrader
LOCAL GAS SAFE ENGINEER

Boiler Servicing in Bromley

A boiler service should be based on what your boiler actually needs. I assess its condition, performance and manufacturer requirements, then carry out the appropriate checks and servicing — without unnecessary parts or shortcuts.

What a Boiler Service Actually Means

A routine service starts with the condition of the boiler in front of me. I carry out a visual inspection, check the flue and combustion readings, verify the working gas pressure and safety devices, clean the system filter and condensate trap where applicable, and check and recharge the expansion vessel where access and the appliance design allow.

A modern condensing boiler is not automatically improved by dismantling it every year. On appliances where the manufacturer provides a negative fan-pressure test, I use that test alongside the flue-gas analysis and the manufacturer’s instructions to decide whether the main heat exchanger genuinely needs opening and cleaning.

  1. Inspect and test. The condition, installation, service history and live readings tell me where to look next.
  2. Compare with the manufacturer’s figures. I am happy to show the customer the instructions, the required result and the reading in front of us.
  3. Leave it alone when it passes. Three identical Worcester boilers can all pass—and recently, three did. I carried the seals and did not need to use any of them.
  4. Prepare and rebook when dismantling is justified. The correct burner seals, electrodes and model-specific parts need to be available before the boiler is opened.

A service is not a promise to strip every boiler down

The service covers the inspection and tests above. If the readings show that a heat-exchanger clean or further repair is needed, I explain why, show the evidence and quote for the additional work. Some boilers require new seals every time the burner is opened; older components such as electrodes, flame sensors or known model-specific parts may also be sensible to renew while the boiler is apart.

A Landlord Gas Safety Check Is Not a Boiler Service

A CP12 or landlord gas-safety inspection is there to confirm that the relevant gas appliances and installation are safe. It is not the same job as maintaining and servicing the boiler. In the same way that an MOT does not include an oil and filter change, an annual gas-safety check should not be mistaken for a boiler service.

A boiler service includes appliance-specific maintenance and performance checks. A landlord inspection has a wider statutory safety purpose and may include work—such as checking the gas installation for tightness—that is not automatically part of an appliance service. If you need both, say so when booking.

Boiler opened for a heat exchanger clean after inspection and testing
The boiler opened only after the readings and condition showed that deeper work was justified.
Contamination inside a condensing boiler heat exchanger
Contamination inside the heat exchanger: this is different from simply vacuuming dust from a boiler case.
Boiler burner plate seal and pump used to recharge an expansion vessel
Correct seals and service parts matter when a modern room-sealed boiler is dismantled.
★★★★★
“I live in Orpington and was looking for someone locally who could provide a yearly boiler service. Steve was recommended by a friend. He arrived promptly completed a thorough service and explained everything really clearly.”
Geraldine Meadowcroft — Google review

Real Boiler Servicing

A real example from a boiler service, showing the boiler opened up and some of the checks and components I look at during the job.

Real work, explained on the job by Steve.

30+ Years' Experience — Knowing What Your Boiler Actually Needs

Not every boiler needs a full strip-down service every year. With over 30 years' experience, I assess each boiler individually and carry out the checks and servicing appropriate to its age, condition and manufacturer.

Flue gas & combustion
Safe operation
Flue & ventilation
Gas & operating performance
Boiler condition, leaks & deterioration
Manufacturer-specific checks

If a more thorough service is needed, I’ll explain what I’ve found and carry out the appropriate cleaning or replacement of service components. No unnecessary parts. No shortcuts. Just the right service for your boiler.

Experienced with All Major Boiler Manufacturers

I'm particularly experienced with Vaillant, Ideal and Worcester Bosch, as well as Baxi, Glow-worm and other major makes of domestic boiler. Different boilers have different servicing requirements, and experience helps identify what needs attention and what does not.

Ideal Heating logo
Vaillant logo
Worcester Bosch logo
Glow-worm logo
Baxi logo
SR Francis Gas Safe Registered credentials

Gas Safe Registered. Local. Experienced.

With over 30 years' experience in plumbing and heating, you'll be dealing directly with Steve. Your boiler is assessed properly and serviced according to its condition and manufacturer requirements.

✓ Gas Safe Registered
✓ Over 30 years' experience
✓ Local Bromley engineer
✓ Manufacturer-specific servicing
Areas We Cover: Bromley Bickley Petts Wood Chislehurst Orpington Beckenham Hayes West Wickham Biggin Hill Keston

Need Your Boiler Serviced?

Call or WhatsApp Steve with the make and model of your boiler if you know it, and I'll help you arrange the appropriate service.

Call Steve WhatsApp Steve
SR Francis Plumbing and HeatingBusiness operating address (no walk-in premises): 19 Holmcroft Way, Bromley BR2 8ADCall 07794 814961 · WhatsApp Steve