SR Francis flame and water drop logo S R Francis PLUMBING & HEATING maintaining the flow of H₂O CIPHE Member
Which? Trusted TraderTrustATrader
TAP REPAIRS & REPLACEMENT • BROMLEY & SURROUNDING AREAS

Leaking or Dripping Tap?

Whether your tap is dripping from the spout, leaking around the handle or base, stiff to operate, or causing water underneath the sink, I’m your local plumber in Bromley for tap repairs and replacement.

Why Taps Drip, Seize, Work Loose or Lose Flow

Dripping

Traditional screw-down taps usually rely on a rubber washer. Most modern quarter-turn and lever taps use ceramic cartridges instead. Grit between the ceramic discs can score the sealing surfaces; once damaged, tightening the handle will not cure it.

Stiff controls

Scale is a common cause, especially on hot bath taps that are used less often than the kitchen tap. A control left in one position for years can become extremely difficult to dismantle.

Loose taps or handles

The tap may never have been clamped correctly, water may have corroded the fixing beneath the sink, or repeated use may have worn the splines between the handle and tap body.

Reduced flow

A blocked outlet aerator is often responsible. Scale and debris can also restrict a cartridge, an isolation valve or a flexible connector.

“Can’t You Just Change the Washer?”

Sometimes, yes—but only if the tap has a washer. A handle that turns several times and tightens down is usually washer-operated. A lever or quarter-turn tap generally contains a model-specific ceramic cartridge. Identifying that cartridge can require the tap to be dismantled and several exact dimensions checked: overall height, body diameter, stem height and width, locating pins and the handle connection can all differ.

If the cartridge is available and the tap is valuable or comes apart cleanly, repair may be sensible. If access is awkward, the tap is heavily scaled, the model is unknown or two cartridges cost almost as much as a complete standard tap, replacement usually offers better value and can often be completed in one visit.

Repair or replacement is discussed with the customer

A standard replacement tap supplied and fitted starts from £175. That covers a normal generic tap; premium pull-out sprays and designer models cost more. Awkward access and seized fittings are common and do not attract an invented surcharge. Occasionally new isolation valves or a small pipework alteration adds a modest extra cost, which I explain first.

Customer photograph of loose tap handles caused by worn splines
Real customer photo: repeated use had worn the handle splines so the tap could feel “off” while still passing water. Replacement was more cost-effective.
★★★★★
“Always happy to recommend someone who does a good job with a smile. Steve replaced our shower a couple of years ago and he was the first person I thought of recently to deal with a dodgy tap. Responsive, friendly, and gets the job done. The fact that he offers a diagnosis by WhatsApp first speeds up the process and reduces the cost. He’s our go-to plumber now.”
Cheryl Newton — Google review

What’s Your Tap Doing?

Dripping from the spout, leaking around the tap, stiff or difficult to operate, or finding water underneath the sink or inside the cupboard? These are all common tap problems and in most cases they can either be repaired or the tap replaced.

Repair the Tap or Replace It?

Not every tap needs replacing. But many modern taps use cartridges rather than old-style washers, and if the make and model are unknown the repair can become uneconomical.

Known Tap & Available Parts

If the make and model are known and the correct cartridge is readily available, repairing a good-quality tap may make sense.

Unknown Cartridge

The tap may need stripping down simply to identify the cartridge, followed by sourcing the part and returning to fit it. On a two-cartridge tap it can also make sense to replace both.

Better Long-Term Value

By the time parts, labour and additional visits are considered, putting that money towards a complete new tap can often be the better option.

Want Some Quick Advice First?

If it’s easier, send me a photo or short video of the tap on WhatsApp. I can often get a good idea of what’s needed before I visit and give you some advice on the best way forward.

There’s no requirement to send anything first — you’re just as welcome to call me and arrange a visit. The photo or video option is simply there if it makes things quicker or easier for you.

You Can Supply Your Own Tap Too

Steve Supplies the Tap

If you simply want something similar to your existing tap, I can select a suitable replacement for you. If helpful, you can send me a photo first and I can send you a picture of the proposed tap for approval before arranging the installation.

You Supply the Tap

Already found the tap you want — including specialist or filtered taps? No problem. I can fit a customer-supplied tap too. If you want, send me the details beforehand and I can flag any obvious extra fittings or minor alterations that may be required.

Got a Leaking or Dripping Tap?

Call Steve to arrange a visit, or if it’s easier, WhatsApp a photo or short video first and I’ll give you some quick advice on the best way forward.

Areas We Cover: Bromley Bickley Petts Wood Chislehurst Orpington Beckenham Hayes West Wickham Keston Biggin Hill Surrounding Areas
Call Steve WhatsApp Steve
SR Francis Plumbing and HeatingBusiness operating address (no walk-in premises): 19 Holmcroft Way, Bromley BR2 8ADCall 07794 814961 · WhatsApp Steve