Practical advice from a local plumberS R Francis • Bromley & surrounding areas
SR Francis flame and water drop logoS R FrancisPLUMBING & HEATINGmaintaining the flow of H₂O
Gas Safe Registered Installer 232331 — Trust the Triangle
HOMEOWNER HINT #6

What Should I Do If I Smell Gas?

If you smell gas or suspect a gas leak, treat it as an emergency. These simple steps can help keep you and your household safe while you contact the National Gas Emergency Service.

SMELL GAS?

Call the National Gas Emergency Service: 0800 111 999

If you suspect an active gas escape, deal with the emergency first. Don't smoke or create a flame or spark, ventilate the property, turn the gas off at the meter if it is safe to do so, and follow the emergency service's instructions.

Call 0800 111 999

Has Your Gas Supply Been Turned Off?

The National Gas Emergency Service engineer's first priority is to make the property safe. They will test for a gas escape and, where necessary, isolate or cap the gas supply so it cannot continue to be used.

Once the immediate danger has been made safe, their job may be complete. You can then need a Gas Safe registered engineer to locate the source of the escape, carry out the necessary repair and test the installation before the gas can safely be put back into service.

That's where S R Francis comes in. I can investigate the installation methodically, trace the source of the gas escape and establish what needs to be repaired.

REAL SR FRANCIS GAS LEAK JOB

Finding the Leak — See the Investigation

This is a typical example of the sort of investigation involved after a gas supply has been made safe. The real job footage shows the detector alarming as the escape is traced, together with the warning-notice section from the job.

SR Francis Gas Safe Registered credentials
HOW I APPROACH IT

Gas Leak Detection Without Guesswork

1

Test the installation

Establish whether the installation is sound and confirm that a leak is present.

2

Trace the fault

Work methodically through the installation to narrow down where the gas is escaping.

3

Repair the cause

Once the source is identified, explain what's required and repair it where practical.

4

Test again

Carry out the appropriate checks after the repair before the installation is returned to use.

LOCAL GAS SAFE ENGINEER

Gas Leak Detection & Repair in Bromley

Gas leak investigation, tightness testing, fault finding and repairs across Bromley and surrounding areas, from a Gas Safe registered engineer with over 30 years' experience.

Need a Gas Safe Engineer After a Gas Emergency?

If the immediate emergency has already been made safe and you now need the leak traced or repaired, call Steve or send a message on WhatsApp.